Welcome to Coatec India

Coatec India supplies the entire system on turnkey basis or in modules depending upon the needs of the user. Coatec provides customized technology &recommendations based upon thecomponent's coating requirements. We apply 25 years of experience in the coating industry when designing a system.

Surface Coating

Technologies

  • Complete paint shop equipment in India: Pre treatment, Cathodic Electro Deposited CED Coating, Baking oven, Spray painting Booth, Powder coating booth
  • Equipments for special coatings: Teflon coating, Rubber to Metal Bonding Adhesive Coating, Glide coating, Dip Spin coating,surface coating

Click Above to View Video


Cathodic Electrocoating

(Cathodic Electro Deposited) CED coating is used extensively in the automotive industry. In this process, the component after phosphate pre treatment is dipped in the bath of Ecoat chemicals

Liquid spray painting

Liquid paint can be applied in many different ways. The type of industrial application process will be determined by the product, the volume, the quality requirements and other factors.

Powder coating

Powder coating is a type of coating that is applied with a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating

Surface Pre Treatment

Cleaning affects all the post processes and should be considered the most critical stage for a good pre-treatment. To define a clean surface we should be able to confirm that the surface

Teflon Coating

Coatec India supplies the complete technology and the equipment for Teflon coating.Teflon is a Registered Trade Mark of DuPont.DuPont has nominated Coatec India as the Licensed Industrial

Rubber to Metal Bonding Adhesive Coating

Rubber to Metal Bonding Adhesive Coating Machine 'Chemlok' is the proprietary product of Lord Corporation. 'Megum' is the proprietary product

Glide Coating

These can be fluidized bed or powder spray. Glide Coating is a generic name for Polyamide Coating. The component is cleaned for all traces of oil and rust. If necessary it is sand

Zinc Flake Coating

Coatec India supplied the Dip Spin Machine for Zinc Flake coating of bulk parts like fasteners. This process is not directly suitable for coating of sheet metal parts with flat surfaces.

Electroplating

This single process covers a very vast range of surface modification technologies: Nickel, Nickel Chrome, Hard Chrome, Acid Zinc, Alkaline Zinc, Copper, ABS, etc.